For sales and support visit:
hubbellpowersystems.com/contact/

Clamps, Messenger Suspension

Clamps, Suspension

Clamps are used with through bolts to support cable at poles. Through bolt also serves as clamping member. One or more nuts and/or washers are used between the pole and clamp for required spacing. No. 7901 is used on very light cables. This one bolt clamp consists of the two clamping members only. Nos. 7902L and 7902R are used at corners and angles. Nos. 7903 and 7904 are used on straight runs.

Angled Clamps
Catalog
Number
Type Mounting Bolt
Hole Dia.
Messenger
Cable Dia.
Clamp
Length
Clamp
Bolts
Approx.
Ship Wt.
per Each
7902L Three-Bolt 11/16" 1/4" to 7/16" 7" Two 1/2" x
1-5/8"
2.04 lbs.
7902R Three-Bolt 13/16" 1/4" to 7/16" 7' Two 1/2" x
1-5/8"
2.04 lbs.
Straight Line Clamps
Catalog
Number
Type Mounting Bolt
Hole Dia.
Messenger
Cable Dia.
Clamp
Length
Clamp
Bolts
Approx.
Ship Wt.
per Each
7901 One-Bolt 11/16" 1/4" to 7/16" 2-1/2" None 0.75 lbs.
7903* Three-Bolt 11/16" x 15/16" 1/4" to 7/16" 5 3/4" Two 1/2" x 1-5/8" 1.78 lbs.
7903L Three-Bolt, Flat Keeper Plate 11/16" x 15/16" 1/4" to 7/16" 5 3/4" Two 1/2" x 1-5/8" 1.77 lbs.
7904 Three-Bolt 13/16" 1/4" to 7/16" 5 3/4" Two 1/2" x 1-5/8" 1.75 lbs.

Strap, Suspension Clamp Reinforcing

Used as additional support in attaching cable suspension clamps to pole for heavy loads.

Strap, Suspension Clamp Reinforcing
Catalog
Number
Steel Size Mounting
Hole Dia.
Hole to Hole
Distance
Approx.
Ship Wt.
per Each
7905 1/8" x 1-1/2" 11/16" 5-29/32" 0.41 lbs.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Pole Line Hardware