Increases spacing between pole and neutral wire. Provides offset between neutral and phase conductors to prevent phase-to-ground contacts during sudden release of accumulated ice. To prevent disassembly due to vibration, insulator is retained with round washer, regular square nut, and selflocking cotter. Use DE4S-series insulator; order separately. Hot-dipped galvanized steel for corrosion resistance.
|Catalog Number||Offset Extension||Accommodates Mounting Bolt Size||Approx. Ship Wt. per Each|
|C2060004*||15"||5/8" Upper, 1/2" Lower||8.00 lbs.|
|DC6N1||13 3/4"||4.50 lbs.|
Used where a neutral wire is used as one of a 3-phase circuit. Has 11/16" mounting slots. Non-insulating. Hot dip galvanized steel.
|Catalog Number||Maximum Wire Size||Offset from Pole Face||Pole Bearing Surface Length||Accommodates Mounting Bolt Size||Approx. Ship Wt. per Each|