For sales and support visit:
hubbellpowersystems.com/contact/

Walk-in Tool Trailers

• Dual rear doors
• Tandem Axles
• 7-ft. width
• Aluminum body
• 7,000-lb. GVW
• 16-ft. & 20-ft. standard lengths

Choice of sizes, hitch and options

The upright workspace and all-weather shelter of these units makes them line-crew favorites. Easy-handling standard- trailer lengths of 16 and 20 feet provide adequate capacity for most hot-line tool sets. Non-stock trailer sizes available by special order are listed below.

Towing-hitch choices include 3" pintle-eye (standard on Catalog Numbers below) or optional 2 5/16" ball-type. Be sure to specify hitch type when ordering.

A full range of factory-installed optional equipment is listed below and on the next page. Any accessory selected must be specified as a separate line item when ordering.

Sturdy construction

Aluminum (0.30" thick) skin delivers advantages of rustproof for long service life and light weight for towing ease. White is exterior-finish color. Plywood interior-wall linings and floor add durability for linework conditions. Interior walls are vinyl coated white to enhance illumination.

Running gear, brakes and towing group are load-rated for road-worthy dependability. Electrical components meet applicable standards.

Standard Equipment

Built-in storage provisions:

Full-length 12"-wide 14"-deep bins with dividers on both sides; 29" x 20"-deep bins across front; overhead rack and thumbscrews for 30 universal tools; two full-height center racks with 100 adjustable plastic-covered supports and 29 elastic tiedowns; ladder channel on floor between tool racks.

Running gear, towing group:

Breakaway-braking system (meets DOT requirements) with battery mounted on tongue; 7,000-lb. GVW tandemaxle with equalizer suspension; four steel-belted radial 15" type ST,8- ply, load-range C tires; fold-up hand-crank tongue jack with sand pad; adjustable-height pintle-eye hitch; two safety chains.

Optional Equipment

Tool storage and care:

Second rack and thumbscrews for 30 universal tools, second tool rack on wall with 24 supports and eight elastic tiedowns, second interior ladder rack, two 12Vdc interior lights with wall switch, 110/220Vac "dry-room" heater. Additional Stud Kit (10 per box) Catalog No. T4002528.

Exterior, mechanicals:

12Vdc power tongue jack, spare tire/wheel on mounting bracket over tongue, rear skid plate, rear-mounted bumper, 25/16" ball-type hitch.


Cable plug mates with socket on vehicle (furnished) for DC connections, even the breakaway-battery recharging circuit.

Double doors hook back for 24" step-up access through 76-1/2"-wide opening to ample interior with 6-ft. 6-in. headroom. Single door forward on right side gives 36"-wide opening.
Catalog No. Description Weight
C4050299 16 ft. Walk-In Trailer 2,200 lb. (990 kg.)
C4050300 20 ft. Walk-In Trailer 2,450 lb. (1,102.5 kg.)





Specifications:


Trailer gross vehicle weight:   7,000 lb.
Tandem axles:   3,500 lb. capacity, each
Trailer curb weight, empty:   2,200 lb.
Payload capacity:   4,800 lb.
Brakes:   Electric, all four wheels
Tires:   ST225/75R-15, load range C
Hitch weight, empty:   210 lb.
Hitch with safety chains:   3" pintle or 2 5/16" ball
Hitch height:   Adjustable, 19" through 27"
Tongue jack:   Manual crank with sand pad
Exterior lights and reflectors:   Comply with ICC

Prefinished (white) aluminum skin 0.30" gauge
Interior floor:   Plywood

Interior walls are vinyl coated white.

Breakaway system & battery (meets DOT)

Standard Storage Provisions

  • 14"-deep bins (both sides), 20"-deep front bins
  • Rack for 30 universal tools (left, overhead)
  • Ladder-rack channel (center, on floor)
  • Full-height tool racks (center-mounted), 150 plastic-coated supports & 29 elastic tiedowns

Optional Equipment

  • Added 30-universal-tool rack (right, overhead)
  • Second ladder channel (over standard rack)
  • Side-wall tool rack (left wall) with 24 plasticcoated supports & eight elastic tiedowns
  • Interior lights, two (overhead midway), 12Vdc
  • Heater unit, 110/220Vac, thermostat & fan
  • Powered tongue jack, 12Vdc
  • Spare tire & wheel on bracket over tongue
  • Rear-mounted bumper • Rear skid plate




Specifications:


Trailer gross vehicle weight:   7,000 lb.
Tandem axles:   3,500 lb. capacity, each
Trailer curb weight, empty:   2,450 lb.
Payload capacity:   4,550 lb.
Brakes:   Electric, all four wheels
Tires:   ST225/75R-15, load range C
Hitch weight, empty:   250 lb.
Hitch with safety chains:   3" pintle or 2 5/16" ball
Hitch height:   Adjustable, 19" through 27"
Tongue jack:   Manual crank with sand pad
Exterior lights and reflectors:   Comply with ICC
Prefinished (white) aluminum skin:   0.30" gauge
Interior floor:   Plywood

Interior walls are vinyl coated white.

Breakaway system & battery (meets DOT)

Standard Storage Provisions

  • 14"-deep bins (both sides), 20"-deep front bins
  • Rack for 30 universal tools (left, overhead)
  • Ladder rack channel (center, floor)
  • Full-height tool racks (center-mounted), 150 plastic-coated supports & 29 elastic tiedowns

Optional Equipment

  • Added 30-universal-tool rack (right, overhead)
  • Second ladder channel (over standard rack)
  • Side-wall tool rack (left wall) with 24 plasticcoated supports & eight elastic tiedowns
  • Interior lights, two (overhead midway), 12Vdc
  • Heater unit, 110/220Vac, thermostat & fan
  • Powered tongue jack, 12Vdc
  • Spare tire & wheel on bracket over tongue
  • Rear-mounted bumper • Rear skid plate
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Lineman Grade Tools