For sales and support visit:
hubbellpowersystems.com/contact/

Universal Poles

Interlock with Universal Tools

Designed for use as a hot stick handle for Universal Tools, Chance Universal Poles are made of Epoxiglas® and lightweight aluminum castings.

The Universal Tools shown on the following pages fit under the thumbscrew of the spline on the Universal Pole. For job versatility, the splines allow angling the tool up to 90° depending upon the individual tool design. Universal Adapter M445584 shown on page 2123 may be added between the pole and tool to gain any angle desired.

Storm Tool for Bad Weather

The Storm Tool, a Universal Pole with special rubber insulator skirts, is designed for emergency use. It provides extra leakage distance and disrupts water paths. Skirts break up water streams that would otherwise run down pole.

Universal Fittings for Spliced Poles

Universal fittings are threaded for use on Epoxiglas poles with Rigid Splices. Also see Catalog Section 2500 for Rigid Pole Splices and Epoxiglas Blank Poles.

Catalog No. Description Pole Dia. Overall Length Weight
PST4032913 Pole with one universal head 1-1/4" 4'2" 1.9 lb./0.9 kg.
H1760 Pole with one universal head 1-1/4" 8' 2" 3.4 lb./1.5 kg.
H17601 Pole with one universal head 1-1/4" 6' 1" 2.7 lb./1.2 kg.
H17602 Rigid spliced pole with one universal head 1-1/4" 4' 1" + 4' 5.5 lb./2.5 kg.
H17603 Pole with two universal heads 1-1/4" 6' 3" 3.1 lb./1.4 kg.
H17604 Pole with two universal heads 1-1/4" 8' 3" 3.8 lb./1.7 kg.
H17606 Rigid spliced pole with two universal heads 1-1/4" 4' 1" + 4' 1" 5.8 lb./2.6 kg.
H176010 Pole with two universal heads 1-1/4" 10' 3" 4.6 lb./2.1 kg.
H176012 Pole with two universal heads 1-1/4" 12' 3" 5.3 lb./2.4 kg.
H176014 Pole with two universal heads 1-1/4" 14' 3" 6.1 lb./2.8 kg.
PST4032914 Spline universal storm tool with two skirts 1-1/4" 4'3" 2.2 lb./1.0 kg.
H1761 Spline universal storm tool with two skirts 1-1/4" 8' 2" 3.6 lb./1.7 kg.
H1770 Hinged pole with one universal head 1-1/4" 8' 2" 5.4 lb./2.4 kg.
H17908 Pole with two universal head, pole hanger 1-1/2" 8' 3" 5.8 lb./2.6 kg.
H179010 Pole with two universal heads 1-1/2" 10' 3" 6.7 lb./3.0 kg.
H179012 Pole with two universal heads 1-1/2" 12' 3" 7.7 lb./3.5 kg.
H179014 Pole with two universal heads 1-1/2" 14' 3" 8.8 lb./4.0 kg.
H4455 Universal head only 1-1/4" - 0.25 lb./0.11 kg.
H4455A Universal head only 1-1/2" - 0.33 lb./0.15 kg.
P4030467P Replacement Thumbscrew - - -



Crossarm Tool Hanger

The Chance Crossarm Tool Hanger is adjustable to crossarms ranging in width from 31/4 to 41/2 inches (depth of the crossarm does not matter). The Crossarm Tool Hanger is made of strong, lightweight aluminum alloy and has cadmium-plated steel hardware.

Catalog No. Description Weight
M1860 Crossarm Tool Hanger 2 lb./.9 kg.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Lineman Grade Tools