For sales and support visit:
hubbellpowersystems.com/contact/

Temporary Conductor Supports

Crossarm Mounting
This Support Tool clamps to the crossarm, adjusting to crossarms from 31/4" x 4" to 6" x 6". The C-clamp is made of heat treated aluminum and can be installed with a Grip-All clampstick. Working load: 150 lb.

CatalogNo. Description Weight
C4000517 Conductor Support, Crossarm 3 1/2 lb./1.6 kg.

Pole Mounting
This Chance Epoxiglas® temporary conductor support is used to hold energized distribution conductors during replacement of poles or repair or replacement of pole top and stand-off insulators; it is furnished with wheel tightener for poles up to 14" in diameter.

Fork-type, 11/2" wireholder is standard equipment or the 21/2" diameter Epoxiglas standoff, accommodating conductor sizes up to 1" in diameter. Working load: 150 lb. per wireholder.*

For 34.5 kV or when the tool is to support an energized conductor overnight or during periods of expected rain, M48057 insulators should be added to the wireholders (see above).

Chain Binder Catalog No. Description Weight
M1848W *H4809W Single Conductor Support 20 lb./ 9 kg.
C4001509 Two Conductor Supports 22 lb./10 kg.

  • D-buckle strap on ratchet pole binder
  • Single- and double-wireholder models

A new D-shaped buckle on the strap free end adds speed and convenience. Hanging a temporary conductor support with this innovation involves just hooking the buckle in the clasp on bracket and cinching the strap with the ratchet handle.

Applications
Epoxiglas® insulated temporary conductor supports are used to hold energized distribution conductors during replacement of poles or repair and replacement of pole-top and stand-off insulators.

Fork-type wireholder accepts up to 1"-diameter conductor. Working load: 150 lb. per wireholder on T4001939 only.

For systems higher than 15 kV or when the tool is to support an energized conductor overnight or during periods of expected rain, M48057 insulators should be added to the wireholders (see Chance catalog page 2211).

Ordering Information

Strap Binder Kit complete with D-buckle and Ratchet Mechanism

Catalog No. Description Weight
T4002007 D-Buckle Strap Binder only 4 1/2 lb./2 kg.

Strap-Type Temporary Conductor Supports Epoxiglas® pole: 2-1/2" diameter

Catalog No. Description Weight
*T4001940 30" - One Conductor Support 14 lb./6.3 kg.
T4001939 48" - Two Conductor Supports 18 lb./8.1 kg.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Lineman Grade Tools