For sales and support visit:
hubbellpowersystems.com/contact/

Rubber-Glove Auxiliary Arm

Tested per OSHA & ASTM F711
This Epoxiglas Auxiliary Arm Assembly is used to change crossarms, insulators, or poles on short spans up to and including 15 kV phase-to-phase. Two M47405W wire tong saddles can be used to mount the mast to the pole. (The saddles are not included and must be ordered separately.)

Two mast pole lengths are available: 5' mast provides a lift of 30" above the top saddle and the 10' mast provides a lift to 46", when the saddles are mounted a recommended 18" apart.

The arm has a balanced load rating of 600 pounds; unbalanced at 150 pounds. Each wireholder is rated at 150 pounds.

Catalog
No.
Description Wireholders Mast
Pole
Size
Crossarm
Pole Size
Weight
Qty. Capacity
H48628 Auxiliary Arm
Assembly
4 2-1/2" Max. 2-1/2"
x
4'11"
2-1/2" x 8' 42 lb./
18.9 kg.
H486251 Mast & Braces None N/A 2-1/2"
x
10'
None 37 lb./
16.65 kg.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Lineman Grade Tools