For sales and support visit:

Pole Clip

Provides an adjustable method of attachment from a pole near the groundline to an appropriate PISA® helical anchor. Hot-dip galvanized per ASTM A153.

Used primarily on H-frame structures, the anchors are installed as close as possible to the pole at the ground line. The installation helps prevent jacking or "walking" the structure out of the ground.

The stud bolt is mounted to the exposed end of the PISA rod and attached to the Pole Clip which is bolted to the pole. 5 1/2" of threads on the stud bolt provide adjustability. The anchors are installed using the same drive tools as when installing PISA anchors for guying applications.

Catalog No. Standard Pkg. Wt. per 100 pieces, lb. Description
E1020690 8 788 For 3/4" and 1" rods
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers